New centrifugal pump programme
Thanks to its modular design, you can select your pump tailor-made with an hydraulic, a construction and shaft sealing as well as suitable materials without compromising your requirements.
 |
TURO Vortex pump Discharge: DN 32 - 150 mm Capacity: up to 120 l/s Head:: up to 130 m |
Application: Advantages: |
Suspensions, slurries, liquids sensitive to abrasion, liquids aerated up to 5%. TURO Vortex impeller, free passage, non-clogging, wear resistant, high efficiency, zero radial forces, long-life sealing properties.
|
 |
Channel Wheel pump Discharge: DN 150 - 500 mm Capacity: up to 1500 l/s Head:: up to 90 m |
Application: Advantages: |
Suspensions and liquids aerated up to 5%. Three-channel impeller, mechanically and hydraulically balanced, large free passages, wear resistant, good efficiency.
|
 |
EGGER Solids Handling pump Discharge: DN 50 - 500 mm Capacity: up to 1300 l/s Head:: up to 140 m |
Application: Advantages: |
Suspensions, liquids with long fibres and liquids aerated up to 25%. EGGER impeller, large free passages, suitable for handling long fibres, high efficiency, low NPSH, wear resistant, operation guaranteed handling liquids up to 25% gas.
|
 |
Elbow propeller pump Discharge: DN 250 - 1100 mm Capacity: up to 5000 l/s Head:: up to 6 m |
Application: Advantages: |
Suspensions, liquids with crystals or long fibres, aerated liquids up to 5%. Long profile axial impeller, large passages, high efficiency, low friction drag coefficient, propeller profile suitable for long fibres on request.
|
 |
IRIS diaphragm control valve Flanges: DN 25 - 600 mm Max. service pressure: 3 - 6 bars Max. service temperature: 120ºC |
Application: Advantages: |
Gas, clean liquids or with suspensions, powders. Centered and symetrical flow, stable regulating characteristic without hysteresis, flow measurement and regulation possible and patented.
|