Hybrid pumps TEO
Patented Vortex Pump with a hybrid impeller. Combines the advantages of our semi-open impeller with those of a Turo® vortex impeller.
Applications
- Sewage sludge in wastewater technology
- Grinding oil emulsions with a high proportion of air
- Emulsions with chips
- SIC slurries in the solar industry
Features
- Stable suction behaviour during the transport of liquids with up to 15% gas content
- Interchangeability with a Turo® Vortex Impeller
Please describe to us your requirements profile and a description of the fluid to be pumped.
Facts & Figures
| Nominal dimensions: | DN 32 - 80 mm |
| 1 1/4 - 3" | |
| Capacity: | up to 35 l/s |
| 550 US gpm | |
| Discharge head: | up to 30 m WS, |
| 100 ft | |
| Operating pressure: | up to 10 bar / 145 psi |
| Operating temperature: | up to 140 °C / 285 °F |
Advantages
- High efficiency, also with viscous fluids
- Large, open spherical channel
- Stable startup level, especially for gas-containing fluids
- Low life cycle costs (LCC)
- Long service life (MTBF)
Additional information on Hybrid Pumps
Models
Dry mounted
Horizontal and vertical
Wet mountedShaft pumps
Cantilever pumps
Submersible pumps
Shaft seal
Materials
In practice
The TEO hybrid pump is often deployed in the automobile industry.
Typical applications of a hybrid pump in the automobile industry. Pumping an aerated cooling and lubricating emulsion with drill swarf.
